Friday, May 25, 2012

Bullion Rose Button Tutorial

Here's a little bullion rose tutorial for you...on a 4-hole button. You just won't believe how cute these are! This one is only about 1/4 inch in hard to photograph...sorry you can't appreciate just how cute it really is by this pic. But, you'll agree for sure once you have tried it...just grab a four hole button and a scrap of fabric to try this out!
First...start by securing the button down with regular sewing thread. You want to rotate the button so that the holes form a diamond and not a square; and secure by stitching vertical and horizontally at least twice...then anchor your sewing thread to the back. Change to embroidery thread and a slender needle without a large it has to pass through the wholes a couple of times.
Next, you start by stitching one bullion of the rose bud color (pink shown in the chart below) using the top and bottom (A & B) holes. You have to use the "poke and pull" method since you can not needle through the hard button. Just needle up at "A"; needle down at "B" but do not pull the thread all the way through...needle back up at "A"...hold the needle straight and wrap the thread starting at the base about eight times around the needle. Now, pinch those wraps between your fingers and pull the needle. This will bring the remainder of your thread through those wraps. Pull downwards and the wraps will begin to tighten up, you can also "nudge" them into place with the needle at this stage by pushing on them slightly...while pulling the thread. Lastly, needle down again at "B" to hold the bullion in place.
Stitch two more bullions in this vertical position with the "pink" embroidery floss. I used silk floss and two strands for these little'll have to adjust as needed based on the size of your button and your floss. Then stitch the green bullions in the same manner but using the "side" holes as shown in this chart as your "A" and the "B" position remains the same...the bottom hole.
I had great fun yesterday creating this little blouse for my new niece...we are awaiting her arrival. The fabric was thicker than the pattern called for...making the neck opening larger than designed. 
 So, instead of a Bishop Style Dress for a six month became a Bishop Style Blouse for a twelve month old. Luckily this was an easy fix to just enlarge the sleeve openings by using longer elastic. Bishop style types are very forgiving...and my muse loves to "adapt and over come!".
Next, I'm off to find some thinner fabric to try this again in the correct size. And, I want to make it longer for more of a christening style gown. We'll see how that comes out. I'm having a great time stitching baby clothes and such....but am getting more behind with my "monthly" it will be a race to see if my muse can catch up! Hugs to all!



Unknown said...

Thank you so much for your lovely easy to follow tutorial I am going to use this to stitch buttons onto a cardigan I am knitting for my granddaughter whose name is Rose. I shared a link to your blog on Facebook as people in my knitting group liked it so much :)

Unknown said...

You are awesome! Thank you for sharing how to do this.

Anonymous said...

Thank you for this post, now 2023, your wonderful blog post has ended my frustrations, & helped me make cute buttons to finish a smocked dress. Thank you immensely